I'm checking my geomtry at the weekend with some proper tools for the job.

Can you confirm the settings as

Front 0.5 to 1 Degree Negative camber
Rear 0 to 0.5 Degree Negative camber

Front 1 degree toe in
Rear 1 degree toe in


These seem to be the common settings i've found through searching.

Don't think castor is adjustable is it?

IIRC ours is set at:-

Front 1° negative camber
Rear 1° negative camber

Front 1° Toe in

You cant adjut the toe out/in on the rear.

Mike

I would give it a bit more rear camber say 1.5 deg

Straight ahead or 0.5 deg front tracking

Rear can be adjusted by shimming the hubs on the uprights if required.

Cheers

mark