Board logo

Wisbech Engineering
Minicooper - 9/5/08 at 12:10 PM

Hello,
Has any one got the dimensions of there bush, cush tube, outer sleeve, I did find a one posted a couple of days ago but I can't find it again

Cheers
David

emsfactory - 9/5/08 at 01:07 PM

some pics in my archive, bush sizes.

Minicooper - 9/5/08 at 01:18 PM

Thanks,
They are to narrow for me, any one know what the dimensions the rallydesign bushes are

Cheers
David

[Edited on 9/5/08 by Minicooper]

Triton - 9/5/08 at 03:45 PM

Same I should imagine

Minicooper - 9/5/08 at 03:51 PM

Hello,
Most bushes I've had and the rallydesign version as well I believe are 44/45 mm to fit into a 50mm box section with 3mm wall cut down into brackets, Wisbech Engineering are 38mm width in total with the outer sleeve being only 27mm. I need to weld 1 inch tube properly on this so I need the extra width!

Cheers
David

[Edited on 9/5/08 by Minicooper]

big_wasa - 9/5/08 at 04:04 PM

Link

Minicooper - 9/5/08 at 04:14 PM

Thanks Big_Wasa, as I said 38mm is'nt wide enough for my application

Cheers
David

[Edited on 9/5/08 by Minicooper]

big_wasa - 9/5/08 at 05:04 PM

pic