Does anyone know where there any pictures of the arrangement which allows you adjust the camber without removing the balljoint. I know there are details in my copy of one of Staniforths books but they are back in Wales.

Im sure there used to be a picture on the MNR website but i can't find it now.

I've just bought a lathe and I'm willing to use it!!

found a pic on the gts site

GTS

http://www.ekmpowershop9.com/ekmps/shops/gtstuning/camber-adjusters-76-p.asp

Drill out the threaded part in the wishbone (if therer's enough material) or make new ones with plain tubes. Then insert the adjuster from the outer end and put 2 nuts on the inner end.

Edit: Too slow!

Fancy making a few extra sets?

[Edited on 16/5/08 by matt_claydon]

thanks for that, its the pic i found

im building the bones from scratch btw

yeah i'd consider making a few sets but you might not like th postage, im in the states

[Edited on 16/5/08 by liam.mccaffrey]