Minicooper
|
| posted on 30/10/11 at 04:01 PM |
|
|
De Dion Rear Toe in
Hello,
Just setting up my jig for the de dion and at the moment it is parallel, is it a small amount of toe in that is desirable? I want to get the axle as
close as possible so I only need the absolute minimum of shims
Cheers
David
|
|
|
|
|
Minicooper
|
| posted on 30/10/11 at 08:15 PM |
|
|
Doesn't matter all done
David
|
|
|
Rob Allison
|
| posted on 1/11/11 at 02:04 PM |
|
|
Toe in help gives grip and helps keep the rear inline. Camber aids grip in cornering. But you can only find the correct amount by adjust and try
|
|
|
Minicooper
|
| posted on 1/11/11 at 03:30 PM |
|
|
Thanks Rob,
I ended up with a small amount of toe in and about 1 degree of negative chamber or as close as I could get it, the finer adjustments will be done with
shims
Cheers
David
|
|
|
