U2U | Member List | Search | Photo Archive | Chat | Links | Shop
Not logged in [Login - Register]
LocostBuilders » Forum » Running Gear » Girling/OBP Master Cylinder Outlet fittings MIG Welders & ARC Welders at MachineMart.co.uk   go to bottom
Printable Version | Subscribe | Add to Favourites
 New Topic New Poll New Reply
Author: Subject: Girling/OBP Master Cylinder Outlet fittings
mikeb
Stars






Posts 908
Registered 30/3/07
Location Nr Wellingborough
Member Is Offline

Photo Archive Go!
Building: Haynes Roadster on the road!
posted on 22/8/12 at 10:09 AM Reply With Quote
Girling/OBP Master Cylinder Outlet fittings

The outlet on my twin master cylinders is 3/8 UNF. I bought some standard male 3/8 brake pipe fittings but when i test fitted them the screwed all the way in and ran out of the thread (I didn't have a bake pipe and flair on so that will give me another couple of mm) but wanted check I have the right fittings. I can't find any longer ones on ebay so hoping a flair on the pipe will allow it to tighten up

The ones I bought were these.

B574/5 Brake Pipe Nuts 3/8' UNF x 24tpi Male Quantity 5 | eBay

Also any cheap options for the inlet fittings which are 7/16 to convert to push on hose to the resevoir.

Cheers
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


 LocostBuilders » Forum » Running Gear » Girling/OBP Master Cylinder Outlet fittings go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.