Dick Axtell
|
| posted on 4/8/13 at 03:03 PM |
|
|
Springs supplier?
Procomp advised that my rear springrates are too high. Suggested I get some 150lb instead.
So which supplier would you recommend? Demon Tweeks comes to mind, but surely there are others? Hope someone has suggestions.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
|
|
Ben_Copeland
|
| posted on 4/8/13 at 03:09 PM |
|
|
I use rally design. They have a massive selection.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
omega 24 v6
|
| posted on 4/8/13 at 03:11 PM |
|
|
Faulkners
If it looks wrong it probably is wrong.
|
|
|
sdh2903
|
| posted on 4/8/13 at 03:27 PM |
|
|
What length/diameter I might have a pair if your interested.
Otherwise jjc race and rally of eBay were the cheapest when I was looking last.
|
|
|
Dick Axtell
|
| posted on 4/8/13 at 05:37 PM |
|
|
Thanks all for your suggestions.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
Davey D
|
| posted on 4/8/13 at 09:27 PM |
|
|
The springs that a lot of places sell are made by Faulkners. I got mine from merlin motorsport
|
|
|
Dick Axtell
|
| posted on 5/8/13 at 08:47 AM |
|
|
quote:
Originally posted by Ben_Copeland
I use rally design. They have a massive selection.
Thanks, Ben. Have browsed their o/l catalogue; they certainly appear to have a very wide range of these springs.
Work-in-Progress: Changed to Zetec + T9. Still trying!!
|
|
|
eddie99
|
| posted on 5/8/13 at 08:56 AM |
|
|
+1 for Faulkners.
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
me!
|
| posted on 5/8/13 at 09:18 AM |
|
|
Procomp supplied mine, Faulkner I believe. They reckoned they were the cheapest with consistent spring rates
|
|
|
