DrEagle
|
| posted on 10/2/05 at 09:46 PM |
|
|
Which Ford CARS have the Type 9 ALLOY bellhousing?
Do any of you chaps know..
Which Ford CARS have the Type 9 ALLOY bellhousing?
I want to raid the scrappy on Saturday and I really want the ally one not the heavy old cast lump!
Never be afraid to try something new!
Remember that a lone amateur built the Ark with no budget,
where as a large group of professionals spent millions building the Titanic!
|
|
|
|
|
Mr G
|
| posted on 10/2/05 at 10:32 PM |
|
|
That will be the OLD Escort RS2000 then, loads of them in the scrappers up and down the country...... 
OR
Early XR4x4 with type 9 4wd box's, although the mating face is not flat and has a cut out for one of gearbox shaft's covers. If you just
bolt it onto a RWD type 9 box it will leak gearbox fluid out - I had to make up an alloy block to sandwich over the end. Hard to explain i've
got pics somewhere which make more sense. Oh and as its a V6 box then it will be longer than a 2.0l one to accomodate the longer input shaft.
If only everything just bolted together......... 
Cheers
G
Found the pics:
Oh, and this is just to wind Billy up... 
[Edited on 10/2/05 by Mr G]
|
|
|
