sonic
|
| posted on 20/5/05 at 08:48 PM |
|
|
MK INDY REAR DISK FITTING
Hi All
I am a brand new member looking for some info please
I have a MK Indy which is running Sierra rear drum brakes and i want to convert to Cosworth LSD and rear disks/calipers
Apart from the odvious diff/disks/calipers what do i need to make them fit on the Indy?
thanks guys look forward to meeting some of you in the future
|
|
|
|
|
colibriman
|
| posted on 20/5/05 at 08:55 PM |
|
|
you would need different rear uprights from mk..the drum ones have the mounting plate at a different angle on the upright....
I think one of the cosworth diff's is a bigger one at 7.5'' instead of 7''...not sure which is model is different but
its a 7'' diff you need
hope this helps
Colin
need a bike engine? - www.colibriman.com
SVA ready Mk Indyblade possibly for sale.....if the offers good...!
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Hellfire
|
| posted on 20/5/05 at 09:04 PM |
|
|
As Colibriman states, the Cosworth LSD is 7.5 " If you want to go LSD, then the XR4x4 or XR4i 7" diff is what you need
[Edited on 20-5-05 by Hellfire]
|
|
|
sonic
|
| posted on 20/5/05 at 09:13 PM |
|
|
Thanks guy's
I will look round for a 7"diff
|
|
|
Kev99
|
| posted on 21/5/05 at 09:06 AM |
|
|
You Will Also Need The Drive Shafts (Bolt in type) And The stub Shafts + The Rear Hub Carriers
|
|
|
