mkblade
|
| posted on 23/10/05 at 09:28 PM |
|
|
ride height mk
hi all
just read a couple of other posts im setting the ride height on my blade power mk.
where do i measure ride height from?
sump and then bttom of rear chassis.
or front chassis to floor and rear chassis to floor i know i should have the rear about 15-20mm higher than the front but not sure where to take the
right measurments.
thanks
simon
|
|
|
|
|
Deckman001
|
| posted on 23/10/05 at 10:19 PM |
|
|
Normaly people talk about the chassis rail height, but rember to take into acount the sump clearence as well !!
Jason
|
|
|
Humbug
|
| posted on 24/10/05 at 05:14 PM |
|
|
Rear of cockpit floor presumably, then which bit at the front? - front of footwell, or the cross member by the front axle?
quote:
Originally posted by Deckman001
Normaly people talk about the chassis rail height, but rember to take into acount the sump clearence as well !!
Jason
|
|
|
