Danozeman
|
| posted on 15/11/05 at 05:15 PM |
|
|
Brake flexi thread sizes.
2 parts to this is anyone can shed some light.
I have some braided hoses with banjo's and i need to change the ends. Is this possible?
If so
what are the threads in the cortina calipers and mk2 escy wheel cyls. and are the crimp on types good for sva.
Ive done a search and come up with nothing.
Thanks
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
Peteff
|
| posted on 15/11/05 at 05:53 PM |
|
|
M10x1
Standard metric brake unions.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
Danozeman
|
| posted on 15/11/05 at 08:10 PM |
|
|
Are they both the same then?
How do u cut the braided hose?
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
rusty nuts
|
| posted on 15/11/05 at 08:14 PM |
|
|
Danozeman, don't buy any banjo's just yet I have a pair complete with bolts and washers with my calipers .
|
|
|
Danozeman
|
| posted on 15/11/05 at 08:48 PM |
|
|
I have banjo's on my hoses. Just didnt think u could use them with Cortina calipers..
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Hornet
|
| posted on 16/11/05 at 08:10 AM |
|
|
yes u can.... i have ... just make sure surface is clean and even.. then use copper washers and hey presto....
Cheers John
|
|
|
.jpg)
