chrisf
|
| posted on 13/1/06 at 02:05 PM |
|
|
Cycle wing stays and calipers
Have any of you guys used the caliper bolts to mount your cycle wing stays? If so, is it safe?
I realize I'm using a different upright than many of you, but it looks like using a caliper bolt might be the only option...
--Thanks, Chris
|
|
|
|
|
NS Dev
|
| posted on 13/1/06 at 03:07 PM |
|
|
perfectly safe as long as nothing compressible is mounted on the bolts which would cause them to lose tension.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
Peteff
|
| posted on 13/1/06 at 03:31 PM |
|
|
I have on my Cortina calipers, no problems. Allow for the thickness of your mounts when you buy bolts, I used 12.9 Allen bolts.
[Edited on 13/1/06 by Peteff]
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
chrisf
|
| posted on 13/1/06 at 03:39 PM |
|
|
Thanks gents!
--Chris
|
|
|
