neilj37
|
| posted on 25/5/07 at 09:22 PM |
|
|
Sierra steering column
This is probably a really stupid question but how do you get the cowling off a sierra steering column. I have undone the 3 screws underneath but it
still won't come off and I can't see anything else to undo. I don't want to force it for fear of breaking something. I just need
access to the ignition cables.
|
|
|
|
|
jos
|
| posted on 25/5/07 at 09:23 PM |
|
|
have you taken the steering wheel off too?
.: Motorsport / motor racing circuit / track wall art Apex Traxs :.
|
|
|
bob
|
| posted on 25/5/07 at 09:25 PM |
|
|
There is also a screw in the top next the hazard switch, the two halves do click together but once all the screws are out it should rattle about and
part.
|
|
|
Hellfire
|
| posted on 25/5/07 at 09:34 PM |
|
|
If you've removed the three screws (two on the bonnet release catch and one at the front) just give it a wiggle and it should pull off. The top
half of the cowl can be left in place, as can the steering wheel.
Phil
|
|
|
neilj37
|
| posted on 28/5/07 at 09:25 AM |
|
|
Got it sorted. The 2 bolts for the redundant bonnet release were holding the cowling on.....doh
|
|
|
