gr8ging
|
| posted on 20/7/07 at 04:17 PM |
|
|
Sierra front up rights
Can I use 4x4 front uprights?
I know they have the drive shaft holes but is there any reason I can't use them?
They would be used on an MNR by the way
Thanks
Weaseling out of things is what separates us from the animals.... except the weasel.
You couldn't fool your own mother on the foolingest day of your life with an electrified fooling machine!
|
|
|
|
|
mark chandler
|
| posted on 20/7/07 at 04:32 PM |
|
|
I throw mine in the bin, heavy lumps of metal....
I believe you can but will need to keep the driveshaft end, so cut off the CV and use whats left to keep the bearings together. The lump of metal
becomes a hub carrier like the rear axle.
Regards Mark
|
|
|
Chippy
|
| posted on 20/7/07 at 09:56 PM |
|
|
As above mate, chuck em! and get a standard pair. Ray
|
|
|
