matt.c
|
 posted on 9/8/07 at 09:28 PM |
|
|
Threadlock
Been using nylock nuts on most bolts on the kit but which bolts should i be using (bottled) threadlock? ie drive shaft bolts etc?
|
|
|
|
|
thunderace
|
| posted on 9/8/07 at 09:40 PM |
|
|
it wont do any harm but its a bit overkill just use a torque bar, i do know a kawasaki guy who usese threadlock on evrything.
|
|
|
Hellfire
|
| posted on 9/8/07 at 10:42 PM |
|
|
As yours is a BEC use some on the Propshaft Adapter and related Nuts and Bolts. Propshaft to diff. Diff to drive shafts.
Just one thing to be wary of - the bolts which secure the prop to the adapter - chech these regularly as the bolts themselves are used as a means of
driving the prop. They have a tendancy to stretch/deform a little and may work lose.
Steve
|
|
|
