Avoneer
|
| posted on 4/9/07 at 08:58 PM |
|
|
Polyurethane Bushes
What are my options.
I need 8 pairs of top hats to fit my current trailing arms or new trailing arms and bushes.
My current bushes are cheap nylon and not a tight fit in my trailing arms.
Polyurethane from Superflex would cost me £60+ for the raw material.
What other options are there?
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
3GEComponents
|
| posted on 4/9/07 at 09:07 PM |
|
|
http://www.wisbech-engineering.co.uk/
Not too sure dimensionaly, but the cheapest supplier i know of.
|
|
|
big_wasa
|
| posted on 4/9/07 at 09:24 PM |
|
|
As above.
They are heavy duty as they are used on there street rods. I was told they where 60 shore but they feel stiffer than that.
Fetched mine from the shop. Quality
They use 1/2 " bolts
 
|
|
|
oadamo
|
| posted on 4/9/07 at 09:26 PM |
|
|
got mine from wisbech engineering i think in total they cost 23 pounds
adam
|
|
|
oadamo
|
| posted on 4/9/07 at 09:28 PM |
|
|
ha wasa you beat me to it
adam
|
|
|
big_wasa
|
| posted on 4/9/07 at 09:28 PM |
|
|
I bought the bushes/ crush tube and outer sleve as a set les than fiver a set.
So £40 and a meter of tube makes 4 nice new arms
|
|
|
oadamo
|
| posted on 4/9/07 at 09:32 PM |
|
|
quote:
Originally posted by big_wasa
I bought the bushes/ crush tube and outer sleve as a set les than fiver a set.
So £40 and a meter of tube makes 4 nice new arms
you forgot to paint em tho
adam
|
|
|
big_wasa
|
| posted on 4/9/07 at 09:32 PM |
|
|
crush tube = steel £1.05 or SS £1.50
outer sleve = £2
Bush halves =£0.55 each half
|
|
|
%20(WinCE).JPG)
