mattgriffiths2002
|
| posted on 6/10/07 at 08:25 AM |
|
|
Which Handbrake Cable To Fit Sierra Cosworth Calipers?
Hi guys,
I have a standard handbrake lever from rally design and rear calipers off a sierra cosworth. I have just bought a sierra handbrake cable to fit the
calipers but:
1. It seems quite long.
2. It doesnt fit to my handbrake lever without some form of modification.
Therefore can anyone recommend a handbrake cable which would suit my setup?
Cheers,
Matt
|
|
|
|
|
stuart_g
|
| posted on 6/10/07 at 09:12 AM |
|
|
Usually the hand brake cable has to be cut to length. You can make an attachment for the handbrake lever from a piece of ally.
We do not know your setup so maybe some more info on what you are building would be useful.
[Edited on 6/10/07 by stuart_g]
|
|
|
BenB
|
| posted on 6/10/07 at 12:00 PM |
|
|
You'll need to cut the inner and rejoin them with wire clamps.
On my car I had to make a L shape piece of metal bar with holes in both ends to bolt to the handbrake lever and the half-moon balancing crescent.
|
|
|
mattgriffiths2002
|
| posted on 6/10/07 at 04:03 PM |
|
|
Thanks for the advice,
I thought I would have to modify it some way like that.
Cheers,
Matt
|
|
|
