scootz
|
| posted on 8/10/07 at 11:29 AM |
|
|
Cv Boot Clips
What's recommended for securing the CV Boots to driveshafts and where do I find them?
|
|
|
|
|
John.Taylor
|
| posted on 8/10/07 at 11:31 AM |
|
|
plastic Zip ties
|
|
|
stevec
|
| posted on 8/10/07 at 11:31 AM |
|
|
Try the usual suspects.
linky
|
|
|
takumi
|
| posted on 8/10/07 at 11:31 AM |
|
|
stainless steel cable ties,
screwfix do them for
£10 for 50, 200mm long.
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
takumi
|
| posted on 8/10/07 at 11:32 AM |
|
|
http://www.screwfix.com/app/sfd/cat/pro.jsp?id=20645&ts=43152
--£10.99
RobinHood 2B 2.0i pinto, Keihin 38mm Carbs, lightened flywheel, O'Mori remote filter kit, 10 row oil cooler. Modified head, 10.2cr, special
valves FR22 cam, 4- 1 header.
|
|
|
BenB
|
| posted on 8/10/07 at 11:58 AM |
|
|
I always use zip ties.....
|
|
|
takumi
|
| posted on 8/10/07 at 01:47 PM |
|
|
I've always used plastic cable ties,
but I only recently discovered these nice s/s ties, I'm going to use them for securing exhaust heat wrap.! must better than twist wire..!
|
|
|
mcerd1
|
| posted on 8/10/07 at 03:50 PM |
|
|
frost have just started selling these (and the tool for them)
http://www.frost.co.uk/item_Detail.asp?productID=9419&frostProductName=%20Boot%20Bands%20(2%20piece)&catID=37&frostCat=New%20Products
&frostSubCat=&subCatID=
not as cheep as cable ties though 
|
|
|
