Nosbod
|
| posted on 23/11/07 at 10:35 PM |
|
|
Securing Brake Discs
Hi
I went to assemble my front Brakes this evening and realised that i couldn't retain the discs onto the hubs.
I can't use a small csk screw as the hubs have no tapped hole in, and i dont have the spire washers (as suggested in the haynes manual) as i
never stripped the donor (bought a donor pack from MK).
Should i drill and tap a suitable hole in the hubs? What have other people done?
Cheers,
Chris.
|
|
|
|
|
bob
|
| posted on 23/11/07 at 10:40 PM |
|
|
Once the calipers are fitted and then the road wheels are on the discs are secured literally with the wheel nuts, the discs are held between the wheel
and hubs.
|
|
|
Bob C
|
| posted on 23/11/07 at 10:42 PM |
|
|
You don't say what hubs - cortina hubs are held on with gurt big bolts!
Other types are frequently held in place by the road wheel & a fairly tight hubcentric middle hole!
|
|
|
Nosbod
|
| posted on 23/11/07 at 10:54 PM |
|
|
Sorry, hubs are off a Sierra but i think bob has answered my question. Ta :-)
|
|
|
