joolsmi16
|
| posted on 24/11/07 at 10:49 AM |
|
|
goodrige unions
Can anyone tell me the size of the unions in the pic or a methods how to check the sizes?
Thanks.JPG)
|
|
|
|
|
Cousin Cleotis
|
| posted on 24/11/07 at 11:10 AM |
|
|
There is a list of spanner sizes used for different size unions somewhere on the web, probably in the goodridge catalog.
You could always remove the unions and check the thread size.
Paul
[Edited on 24/11/07 by Cousin Cleotis]
|
|
|
Ricks-9r
|
| posted on 24/11/07 at 12:28 PM |
|
|
http://www.speedflow.co.uk/help10.htm
http://www.kurthydraulics.com/threads.php ,as a guide 6 AN =14mm ish or 9/16, the nut size or spanner size is 11/16 or 18mm ,hope this helps ,someone
correct me if ime wrong
|
|
|
joolsmi16
|
| posted on 24/11/07 at 01:38 PM |
|
|
unions
thanks for reply all of help.
Jools
|
|
|
Phil.J
|
| posted on 24/11/07 at 02:33 PM |
|
|
look like -6 to me.
|
|
|
russbost
|
| posted on 24/11/07 at 05:08 PM |
|
|
-06 has an I.D of 8.7mm & has 9/16 x 18 thread (ie 9/16 is the O.D of the thread)
-08 has an I.D of 11.1mm & has 3/4 x 16 thread
HTH - I don't stock these unions/hoses but can get them in - I believe cheaper than you'll get them anywhere else
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
