oadamo
|
| posted on 31/12/07 at 01:16 PM |
|
|
panhard rod saxo track car
hi ive got to moun t the panhard rod on but what size rose joints do you think i should use.
adam
|
|
|
|
|
big_wasa
|
| posted on 31/12/07 at 01:31 PM |
|
|
12mm or 1/2" with the 1/2" being cheaper 
should do the job
|
|
|
TGR-ECOSSE
|
| posted on 31/12/07 at 01:56 PM |
|
|
I would agree 1/2" x 1/2" and would recommend McGill Motorsport as the place to
get them.
|
|
|
oadamo
|
| posted on 31/12/07 at 06:16 PM |
|
|
on the bay mcgill sells 5 rose joints for £11 do you no if these are up to the job. and for the wishbones on my locost.
adam
|
|
|
worX
|
| posted on 31/12/07 at 06:24 PM |
|
|
OT
We've not seen photos of this project for a while Adam, how about an update?
Steve
|
|
|
oadamo
|
| posted on 31/12/07 at 07:11 PM |
|
|
quote:
Originally posted by worX
We've not seen photos of this project for a while Adam, how about an update?
Steve
theres a lot gone on with it lol. the shocks that i bought for the locost didnt fit. so now there on the saxo. so iam on the look out for some more. i
bought a cbr engine for the locost then i bought another one lol. so the first ones going in the saxo and the other in the locost.the saxo is nearly
done just weld a couple of mounts in. get the prop done and tidy up the wiring.but iam thinking about spraying it black. but iam still striping all
the stuff out from under the dash to get it as light as possible. ill get some pics up soon. adam
|
|
|
