Nosbod
|
| posted on 10/2/08 at 09:54 AM |
|
|
Check my Brake Pipe Route.
I was hoping that some of you kind people would have a look at my brake pipe route (in my photo archive) to see if it's ok before I permanently
attach it.
Also am i right in thinking that I need to clip it about every 200mm ?
Thanks in advance,
Chris 
|
|
|
|
|
afj
|
| posted on 10/2/08 at 10:02 AM |
|
|
looks the same as mine
[Edited on 10/2/08 by afj]
|
|
|
wicket
|
| posted on 10/2/08 at 10:52 AM |
|
|
I originally had my brake light switch that way round but it was a problem bleeding to remove trapped air in the switch (brake lights not working
consistently), turned the switch through 180 degs problem went away.
|
|
|
Macbeast
|
| posted on 10/2/08 at 11:43 AM |
|
|
It looks as if you will have to be very careful there is no danger of the flexis rubbing, on steering column and on rear suspension for example.
|
|
|
Schrodinger
|
| posted on 10/2/08 at 09:48 PM |
|
|
I would agree with all of the previous comments but don't forget that the front flexis will probably need to pass through a panel before you
fill with fluid.
Keith
Aviemore
|
|
|
