omega 24 v6
|
 posted on 5/3/08 at 09:03 PM |
|
|
1.9 spring OD
As title really. I need to know the outside diameter of a 1.9 spring. I THINK I may JUST have enough clearance so I really need quite an accurate
measurement please. I'm assuming that most of them will be the same diameter (even for differing poundages)BUT just in case it's for the
front of a 442 with an xe engine and probably a bit on the heavy side as well (like me)
As always thanks in advance.
Gary
If it looks wrong it probably is wrong.
|
|
|
|
|
Chippy
|
| posted on 5/3/08 at 10:02 PM |
|
|
Gary, just measured a 200lb set I have in the garage, as near as dammit is to swearing, 2 11/16" or 68.5mm. HTH Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
omega 24 v6
|
| posted on 6/3/08 at 12:45 PM |
|
|
Many thanks Ray.
If it looks wrong it probably is wrong.
|
|
|
