iiyama
|
| posted on 12/3/08 at 07:11 PM |
|
|
Sierra hubs
I know the PCD is 108 but whats the spec of these hubs? ie overall diameter and the diameter of central spigot? Amyone have the details to hand?
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
|
|
mcerd1
|
| posted on 13/3/08 at 09:15 AM |
|
|
What are you planning this time - alloy ones to go in your dax uprights ?? 
dia of central spigot = 63.4mm
I've got a spare set I can measure for you (or lend to you)
|
|
|
iiyama
|
| posted on 13/3/08 at 06:38 PM |
|
|
Watcha bud! Nah, just making up some wheel spacers. Need 30mm but anything that size is a/ crazy money and b/ needing 8 nuts/bolts per side. Have got
longer studs on the hub so just need em to be held in place by the wheel nuts.
|
|
|
mcerd1
|
| posted on 13/3/08 at 08:48 PM |
|
|
I'll dig my hubs at the weekend
do you want me to 'tweak' that spacer drawing I did before ?
[Edited on 13/3/08 by mcerd1]
|
|
|
iiyama
|
| posted on 13/3/08 at 10:22 PM |
|
|
Pretty much got the drawing done mate. Spigots drawn in at 63.4mm as you informed. Diameter is 145mm, PCD 108, bolt holes 12mm dia.
So if the 145mm dim is correct I think Im about there! Be good if you can confirm that for me. Thanks for the offer though! 
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|
|
mcerd1
|
| posted on 17/3/08 at 01:12 PM |
|
|
u2u sent
|
|
|
