dave1888
|
| posted on 27/3/08 at 07:03 PM |
|
|
Handbrake cable
I got sierra discs fitted on the rear of my tiger and need to make a better job of the handbrake cable cut and shut aint working. anyone used or got a
better method
|
|
|
|
|
coozer
|
| posted on 27/3/08 at 07:09 PM |
|
|
Not sure if this will help but I used Freelander cables with a Rover 200 handle... Mind that was for a drum setup tho.
Have a butchers in my blog for details and pics.
Steve
1972 V8 Jago
1980 Z750
|
|
|
saigonij
|
| posted on 27/3/08 at 09:21 PM |
|
|
westfield sierra hand brake cable is already shortened.
worked on my luego.
|
|
|
dave1888
|
| posted on 27/3/08 at 10:21 PM |
|
|
I will call westfield tomorrow and check it out
|
|
|
saigonij
|
| posted on 28/3/08 at 10:42 AM |
|
|
i ordered mine from their online shop.
|
|
|
NS Dev
|
| posted on 28/3/08 at 10:34 PM |
|
|
I cut and shut mine with sierra discs and its fine.
Cut it at the loop end (i.e. the bit near the lever) then join it with a drilled bolt, nut and washers
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
