cortina uprights with rod ends

Not logged in [Login - Register]

LocostBuilders » Forum » Running Gear » cortina uprights with rod ends

Air Compressors at MachineMart.co.uk

Printable Version | Subscribe | Add to Favourites

oadamo

Contributor

Posts 1741
Registered 25/2/07
Location west mids
Member Is Offline

Photo Archive Go!

Building: collection of engines

posted on 12/4/08 at 10:28 PM

cortina uprights with rod ends

is it posible to use rod ends on the cortina uprights, what needs doing to usee them.
adam

nitram38

Contributor

Posts 5692
Registered 2/2/06
Location Mitcham Surrey
Member Is Offline

Photo Archive Go!

Building: MotaLeira.....paint your chassis

posted on 12/4/08 at 10:32 PM

I would think drilling them to get rid of the tapered holes (If they have them) and making some wedge shaped spacer washers to lift under the rod end off the flat of the upright.
This will allow them a greater angle without binding.

rusty nuts

Contributor

Posts 10954
Registered 21/10/03
Location Cambridge
Member Is Offline

Photo Archive Go!

Building: luego locost on the road

posted on 12/4/08 at 10:46 PM

Think if you check the Rally Design website they do an adaptor to fit rod ends. Fits into the taper and allows the rod end to be fitted .

LocostBuilders » Forum » Running Gear » cortina uprights with rod ends

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.