foes
|
| posted on 24/5/08 at 08:42 AM |
|
|
Steering wheel to column bolts, m5..?
i'm just about to drill my steering wheel to fit to the quick release boss that came with the column/paddle kit as supplied by stuart taylor.
The boss has the standard 3 holes in but are sized for m5 bolts, will 3 m5 grade 12.9 capheads be strong enough...?
cheers.
|
|
|
|
|
nitram38
|
| posted on 24/5/08 at 09:33 AM |
|
|
No problem. If the boss has that thread then that is what they were designed to take.
|
|
|
worX
|
| posted on 24/5/08 at 11:12 AM |
|
|
Yes, they'll be fine!
|
|
|
RazMan
|
| posted on 24/5/08 at 03:46 PM |
|
|
That's what I used and they are perfectly ok
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
foes
|
| posted on 24/5/08 at 07:48 PM |
|
|
cool, thanks for the replies...
|
|
|
