Danozeman
|
| posted on 7/12/05 at 10:08 PM |
|
|
Prop shaft splines.
I have a prop shaft sitting in my shed which has the splines yokes on the end for a 4spd box. Can the end be changed for a sierra item for a type 9
using the same u/j etc?
If not its up for sale.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
|
|
theconrodkid
|
| posted on 7/12/05 at 10:15 PM |
|
|
seirra,s apart from some early ones had a rubber donut,the escort auto one will fit a t9,some sherpa/transit ones are sposed to fit as well.
there are about 2/3 diffo sizes to choose from but they are staked in so difficult to replace.
new props arnt that dear.
soooooooooooooooooo best way is a new prop
who cares who wins
pass the pork pies
|
|
|
britishtrident
|
| posted on 8/12/05 at 07:45 AM |
|
|
Cooking Escort spline is too small to fit anything else, Some but not all Cortina/Capri/Transit splines fit the Sierra box.
Steaked shaft UJ come in about 3 different size widths on Fords -- so hybridising a shaft that way is tricky.
|
|
|
