pbs
|
| posted on 26/1/06 at 05:41 PM |
|
|
Handbrake cable problem
I have a problem with the clearance between my handbrake cable and my rear wishbones and I think it my cause an SVA fail.
The handbrake cables rub on the bottom wishbones and I can't bend them any further than what they are due to the metal covering on the cable.
Has anyone got any suggestions on how I could resolve this problem? Different cables perhaps.
The rear callipers are from a Serria as are the handbrake cables.
 
Rescued attachment DSC01180.jpg
Build your own sports car for £250 my ar5e!!
|
|
|
|
|
pbs
|
| posted on 26/1/06 at 05:42 PM |
|
|
Other side
 
Rescued attachment DSC01182.jpg
Build your own sports car for £250 my ar5e!!
|
|
|
mookaloid
|
| posted on 26/1/06 at 06:02 PM |
|
|
Hard to tell from your photos but maybe if you swapped the calipers from one side to the other and had the cable coming out from the top it would
help?
Cheers
Mark
|
|
|
andyharding
|
| posted on 26/1/06 at 06:04 PM |
|
|
My handbrake cables touch my DeDion. I just covered them with rubber host and cable tied them so they couldn't rub. SVA man didn't
comment.
Are you a Mac user or a retard?
|
|
|
phillippe
|
 posted on 26/1/06 at 06:17 PM |
|
|
spellings goin worse
sva say ok to cover in pipe and swop the calipers round will solv the problme my spelling is bad intit boys and girls lol
 
Rescued attachment nov 25 2005 016.jpg
|
|
|
pbs
|
| posted on 26/1/06 at 08:52 PM |
|
|
I have thought about swapping the calipers over but I may have the same problem with the top wishbone,may give it a try.
Failing that I think I might cover it with a rubber tube and tiewrap the cable to the bottom wish bone.
Build your own sports car for £250 my ar5e!!
|
|
|
NS Dev
|
| posted on 27/1/06 at 12:06 AM |
|
|
also if you swap them over they need taking off to bleed them!
|
|
|
RazMan
|
| posted on 27/1/06 at 10:08 AM |
|
|
I had to swap my calipers over to prevent the handbrake cable hanging too far below the chassis
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
