blakep82
|
| posted on 6/1/08 at 09:45 PM |
|
|
where's good for atlas axle diff covers?
nice and cheap is whats in order here 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
Peteff
|
| posted on 6/1/08 at 10:51 PM |
|
|
Has yours rusted through as well? I'm welding mine up and painting it with tank sealant inside and out.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
blakep82
|
| posted on 6/1/08 at 10:55 PM |
|
|
quote:
Originally posted by Peteff
Has yours rusted through as well? I'm welding mine up and painting it with tank sealant inside and out.
mine hasn't rusted through at all! it just never had one had considered trying to make one up. too much hassle though. hmmm, my original
choice of axle (Dana 30, its too wide, too heavy, too... etc etc) has a fibreglass cover as standard. worth a thought
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
oadamo
|
| posted on 6/1/08 at 11:11 PM |
|
|
stainless dog bowl
adam
|
|
|
blakep82
|
| posted on 6/1/08 at 11:18 PM |
|
|
quote:
Originally posted by oadamo
stainless dog bowl
adam
good call! how hard is it to mig stainless? i'm just thinking the flange round it might not be wide enough, but could always cut the original
one off and re weld 
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
02GF74
|
| posted on 7/1/08 at 10:47 AM |
|
|
or a wok? - unlikely to be stainless.
|
|
|
blakep82
|
| posted on 7/1/08 at 10:24 PM |
|
|
:O just remembered there's a stainless cat food bowl somewhere in the garden! should be about the right size with some extra stainless welded
on! just needs some work on the flange (ooer) and some stainless wire. got some argon already...
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
02GF74
|
| posted on 9/1/08 at 01:26 PM |
|
|
ask this lady if you can use one of here bowls? 
|
|
|
