Snap-off
|
| posted on 11/7/08 at 11:59 AM |
|
|
Hose fitting suitability?
Hi guys, I fitted this hose fitting between my front braided hose and Wilwood calipers.
Adaptor
I have been asked to provide physical or documentary evidence to show that these are suitable for brake lines, regulations etc.
Can anyone see a problem with these adaptors?
Thanks Again!
[Edited on 11/7/08 by Snap-off]
|
|
|
|
|
Mr Whippy
|
| posted on 11/7/08 at 12:08 PM |
|
|
did you sleep with his wife or something? he seems a right moan
|
|
|
Snap-off
|
| posted on 11/7/08 at 12:12 PM |
|
|
quote:
Originally posted by Mr Whippy
did you sleep with his wife or something? he seems a right moan
Lol! I think he was having a bad day!
He would not allow any tinkering at all! 
I failed on,
Emissions - Lambda 0.2 over
Rear brake locking up
Side indicators not bright enough
No evidence of brake adaptor
|
|
|
Mr Whippy
|
| posted on 11/7/08 at 12:18 PM |
|
|
god what a git
maybe just fit standard hoses that don't need adaptors for the test?
|
|
|
Blackbird Rush
|
| posted on 11/7/08 at 12:53 PM |
|
|
Those adaptors are as supplied by rally design to go with their willwood kits, cant see what the issue is as its being used for what it was designed
for.
Ask rally design for a letter saying they are OK.
(i've got these as well on my willwoods)
Ash.
|
|
|
big_wasa
|
| posted on 11/7/08 at 01:34 PM |
|
|
What an arse, was that Norwich ?
|
|
|
BenB
|
| posted on 11/7/08 at 02:54 PM |
|
|
Jeez! Who pissed in his cheerioes? 
I think I'd print off the page from RalDes where it says "Euroquip : Brake hose connectors" or whatever.... Should persuade all but
the most anally retentive tester....
|
|
|
Snap-off
|
| posted on 11/7/08 at 03:22 PM |
|
|
quote:
Originally posted by big_wasa
What an arse, was that Norwich ?
Yes, it was Norwich. I don't want to say too much about the test as I still have to go back. Lol! 
|
|
|
TimC
|
| posted on 11/7/08 at 04:15 PM |
|
|
What a complete and utter... I think you know the rest.
|
|
|
