Has anyone else used Baby Cub Seats in their cars?
I have some ready to go in my Avon but I`m having trouble fixing them in!
On the Avon the seat rails are too close together to meet up with the fixing points on these seats. I can`t just fix them to the aluminium floor as this would not be strong enough, but I also dont really want to start welding supports in either.
Any suggestions?

I have a pair of baby cubs in my car - but I didn't fit the rails as they were rubbish! I just bolted them to the steel floor, with great big washers behind.
Mine are right up against the rear bulkhead anyway, so the floor fixing is less important - if I hit anything frontwards my seatbelts will hold me, and if someone hits my back then the bulkhead will stop me!
DJ

Mine are bolted staight to the steel flor as well,using the existing threads in the baby cub seats M8 i think.

Hi
I have just fitted Baby Cubs in mine.
Same way with large 45mm / 3mm thk penny washers.
M 8 socket heads, came with seats.
Or if you still want to use existing adjusters, why don't you make a transfer plate in say 5mm .Drill to suit seat holes and 2nd set of holes to suit adjusters. The hard bit is bolting them together!
Have a look in my photo's
[Edited on 31/1/05 by lukefab]

[Edited on 31/1/05 by lukefab]

i have a pair of baby cubs in mine i fixed them to the sierra runners so this made them adjustable

Sorry to hijack slightly...

Whats the weight of baby cubs compared to something like the full GRP seats that MK/GTS sell? Also wheres the best place to get them from?

Cheers,
David

I don't know about the weights but the best place to buy them from is,
Midland Wheel Supplies.
www.midlandwheelsshop.com
They are £150 -00p a pair!+ Carriage.
Hope that helps.