* I've got a big bag of nut covers...

M10 and M12 usual suspension bolt sizes. Measure 17mm and 19mm across the flats.

Only downside is their white, but if they are just for SVA i suppose it wont matter too much.

Let me know what you require and i'll do them cheap!

* Also have an unused Track Rod Shroud Kit
£ 3.00 plus postage.


* Finally i have a SPEEDO SENSOR 6MM (PERCEPTION) I've got 4 magnets suitable for it. But no bracket. Through its not difficult to make your own.

Same As This One
Let me know if you need more magnets, cos i might have a couple spare.
£20 plus postage.

Thanks

[Edited on 27/6/09 by Ben_Copeland]

U2U sent Ben

.....Neil

Replied