Got one sat in the garage taking up space. Moves through all the gears and spins freely. It's got another bell housing with different bolt holes too included (it's red if that means anything) Your's for a couple of beer tokens.
It's located in Derby

A couple of pics:






[Edited on 6/11/09 by thefreak]

[Edited on 6/11/09 by thefreak]

ooh thts a bargain. a real bargain. wish i lived closer...

Not sure that's a type 9?? Cover looks different to mine..

Dan

Someone said it might be a Type 2? It's the 4 speed version of the 5 speed type 9
It was bolted straight onto a 1600 xflow engine too

Looking at Burton Power's site, think it could be a type 2:
http://www.burtonpower.com/technical_1/type_2_gearbox.aspx

[Edited on 6/11/09 by thefreak]

i'm going with type 3, on account of those 3 bits joining top tubs and the bottom tube on the tail housing. and the flat cover (rather than the T thing on the type 2)



[Edited on 6/11/09 by blakep82]

[Edited on 6/11/09 by blakep82]

Looks very similar to the Type C 4 speed i had - well as i remember it. Although from the pic above type 3 looks likely.

Lol it's a 4 speed box that'll bolt onto the crossflow I've got 2 bellhousings with it... and it's all freeeeeee!

Still tripping up on this each time I go out to the garage.
No one want?

I can collect it at weekend if possible.
Got a tel number etc mate??

Provisionally going to brianthemagical. If he changes his mind I'll let you know.