Board logo

Toyota 4AGZE supercharged engine
bimbleuk - 13/11/09 at 01:50 PM

I'm selling the 4AGZE I bought recently from RAW. The wiring was unsympathetically cut when removed from the donor car. However the connectors and sensors are still on the engine.

This is a late revision engine as its has the smaller supercharger pulley and the coil packs.

Going to be collection only unless the buyer arranges a courier. However I have an engine crane currently (yep the one in the picture!) so I can help with the loading.

Looks a bit dusty as RAW kept it near the body peparation area but the pipes etc were all masked

A few people on here knew I was going to use it for spares or rebuilding my Rotrex 20V engine project. However I've now sold all that for a change of direction, so its now surplus.

£450 ono







[Edited on 13-11-09 by bimbleuk]


Chippy - 13/11/09 at 02:06 PM

quote:

Looks a bit dusty as RAW kept it near the body peparation area but the pipes etc were all masked



I think that should read, "You can just make it out under the huge pile of dust" Cheers Ray


djtom - 13/11/09 at 02:11 PM

Post it on Driftworks and ask £1k for it. I bet you sell it - the sideways boys love these things.


bimbleuk - 13/11/09 at 02:38 PM

quote:
Originally posted by djtom
Post it on Driftworks and ask £1k for it. I bet you sell it - the sideways boys love these things.


Thanks for the tip.

I hope someone can use it on here otherwise it'll be on Ebay etc.


02GF74 - 13/11/09 at 03:34 PM

don't wish to be picky, but how much effort would it be to slap it into the hoist, wheel it out onto your drive and give it a quick going over with a brush?


bimbleuk - 13/11/09 at 04:30 PM

quote:
Originally posted by 02GF74
don't wish to be picky, but how much effort would it be to slap it into the hoist, wheel it out onto your drive and give it a quick going over with a brush?


That's not being picky and I should have doen it when I first put it in the garage (the pictures a re from then). At the mo its behind my other spare engine and then behind my Striker which is up on stands as I'm removing the current engine install as I've sold it. Once that's out this weekend I will give it a once over then put if on Ebay or Toyota/JDM oriented forums.

[Edited on 13-11-09 by bimbleuk]


55ant - 13/11/09 at 05:38 PM

also put it on mr2oc, but they can be funny about non-members i think.


oldtimer - 13/11/09 at 05:48 PM

u2u sent


Werner Van Loock - 13/11/09 at 09:55 PM

would it fit a striker?


bimbleuk - 14/11/09 at 07:01 AM

Currently sold but awaiting collection and payment on Tuesday.