i have for sale 4 trumpets from a gsxr 600 airbox.

They will mount onto 50mm outside diameter tbs/carbs

2 are short and 2 long

Can get picture and take more measurements if interested

£10 posted

(Have got the airbox as well but this will cost a couple £ extra in postage if you want this)

U2U Sent

still available

Can you post a few pics of both the trumpets and the airbox bit please?

will take some first thing tomorrow

Image deleted by owner
Image deleted by owner
Image deleted by owner

hmmm, thanks for posting the pics mate, but unfortunately they dont look much like what we need - was a long shot, sorry for wasting your time.

no probs


bump

Im after a set of these but my K1 GSXR600 bodys are 45mm outside diameter, do you think these are from a different year or do you reckon they will be nearer 45mm than 50mm ??

Cheers Andy

Sorry to be a pain but could you measure the holes in the airbox because the rubbers i need fit in an airbox with 50mm diameter holes & the throttle bodies are 45mm outside diameter. I presume the rubber is about 2mm thick where it fits into the airbox.
The photo you put up looks spot on for what i need, if they are the right diameter i will take them.

Will measure tomorrow.

Just a thought are you measureing the right end? As I was looking at the gsxr 600 and it was the engine side that had id of 38 and od of 44.
The airbox end was 50 od

Im pretty sure i am but wont know for sure until i home get tomorrow evening, if the size is right can i have 1st dibs please ??

I will measure the outside diameters of my throttle bodies as soon as i get back, currently at my parents emptying a 1400+ gallon koi pond to clean it out, its turned into a big job !

Will U2U as soon as i know saturday night,

Cheers Andy

Sorry andy it seems you are correct.
Just remeasured and the inside diameter of the trumpets is 45mm.
Hole in airbox is 50mm

Great, i will take them then, you have U2U

Cheers Andy