I have the following for sales following day 1 of my clear out (can't wait for day 2)


set of unused ARP conrod bolts, part number 151-6003, for black top zetec. Opened only to confirm fit, which they do £40

set of new blacktop head bolts, bought from Burtons £10

1.8 blacktop flywheel (much lighter than the 2.0 one) £20

sold subject to payment2.0 blacktop head complete with valves, cams, and covers. (note there is some light surface rust on the cams, but it seems to just rub of when you go over it with your fingers £20 (collection only)

sold subject to payment2.0 blacktop engine block with pistons, crank, rods, flywheel, etc, all still attached. £20 (collection only)

1 sold subject to payment2x blacktop two part sumps with pick up. One is 1.8 and one 2.0, appear to be the same part though/ £10 each

sold subject to payment2x coilpack mounts and 2x coilpacks (one looking newish and comes with leads) I accumulated them with other parts. £10 for all

throttle body, black top £5

original 2.0 blacktop starter motor £5


accelerator pedal £20



soldcut-off switch unused £3


soldnumber plate surround unused £3

exhaust clamps unused 2 3/8 £3 for both



exhaust flexi 2”, 10cm long £3



cosworth amal valve £10



flexible coolant hose 68 cm long, diameter stated as 1.25" to 1.375" £10



soldset of stamps £5

sold2x temp sensors from GSXR airbox, I use these with MS £3 each

sold3m+ red vacuum tube 4mm £3

let me know what you want an I will price postage, unless of course you want to collect.

Lars

[Edited on 13/9/10 by Lars]

[Edited on 13/9/10 by Lars]

[Edited on 13/9/10 by Lars]

I'll take the stamps and the numberplate surround please

Ben

Ill take the vacuum hose and temp senders please. Will U2U my email address.

Does the thermostat housing have the coolant sensor? Cracked mine yesterday. u2u me a price posted. cheers

Why is it all the 2.0 zetecs that come up for sale for a good price are miles away.

GRRRRRR

Andy

I wanted this head mate, but with postage seals etc it was cheaper for new block - id have the lot if he lived closer

I'll take the coil packs and brackets. u2u sent.

For any one living north (ish).
I will be travelling up to Leeds sunday 26th eve for 2 days.

So would be happy to take the engine with me.

Lars

hiya mate, am close to leeds. so i'll take the zetec and sump. u2u sent

[Edited on 13/9/10 by femster87]

[Edited on 13/9/10 by femster87]

u2u re head bolts

Hi, are the ARP Con Rod Bolts still available? Thanks.

Ill take one of the sumps and the coolant hose. Can you bring them to Leeds with you?

Simon

U2U sent re: 1.8 Flywheel