Board logo

pinto and exhaust can
femster87 - 5/11/10 at 09:36 AM

I have for sale my 1.8 pinto. i was gonna use this before i swapped to a zetec. in its standard condition. came out of a tiger. the sump has been shortened (no extra capacity added) but strengthened with 8mm bars welled at bottom to prevent damage, this was all done by previous owner. its just sat in my garage now so please come and take away for £20. also one of the stud bolts on the exhaust side got sheared in the head been drilled out so a bit wider now would need to be rethreaded and bigger bolts used.

also I have an exhaust silencer and primary tubes that came of the same engine. no collector. £50

picture here


http://s1210.photobucket.com/albums/cc414/femster87/?action=view&current=DSCF2801.jpg

regards
femi

[Edited on 5/11/10 by femster87]

[Edited on 5/11/10 by femster87]


dinger205 - 5/11/10 at 12:33 PM

Link doesnt work Femi


femster87 - 5/11/10 at 12:38 PM

changed now