hi after trying to get the build up and running i have failed and my wife is only 10 weeks from our first child. so if anyone is thinking about starting i have a few things to help you on your way.

CHASSIS (made by greaseymonkey from haynes forum)
All brackets welded in place chassis all welded.

REAR UPRIGHTS – drum type made by talon with adaptors to disc

NEW FRONT HUBS –reamed already

FULL SET OF WISHBONES – made by myself

3GE NYLON BUSHES + TUBES

CHASSIS PAINT

2 DIFF (1 push in, 1 bolt on)

2 SETS OF DRIVE SHAFTS

2 LITRE SILVER TOP ENGINE

1.8 CVH ENGINE

SIERRA WIRING LOOM

SIERRA DIALS

NEW FRONT CALIPERS

NEW REAR CALIPERS (disc type)

NEW DISC FRONT AND BACK

NEW PADS FOR REAR

2 ESCORT STEERING RACK
(1 new quick rack mk2 – 1 used rack mk1)

NEW POLO RADIATOR

NEW 2 MAXI BALL JOINTS

NEW 2 TRANSIT LINKS

NEW 2 TRACK ROD ENDS

STEERING RACK EXTENSION (talon)

2 OFFSET MUSHROOMS (aluminum)

1 HARNESS

SET OF BIKE CARBS

SIERRA STEERING WHEEL (with key)

front frame/set of suspension brackets/25m of 25 x 25 box/12m 19 x 19 box section both 1.6 mm thick/3ge bush kit for pedals/various plates for chassis/ various bolts/2 used set of front uprights stripped/back plate for brakes and drums used and various othe part exhaust manifold.


OPEN TO OFFERS FOR JOB LOT NOT SPILTIING NEXT STEP EBAY THANKS FOR LOOKING.

steve

[Edited on 17/6/11 by whitstella]