I have forsale a Clark industrial SE16 150litre 3hp single phase 14 cfm compressor
This is about 2 1/2 years old but has hardly been used lass than 3 hours in total so its like new.
•14cfm displacment - cast iron, twin cylinder air compressor pump
•150 litre air receiver (CE certified)
•3hp motor, 230v, 1ph continuously rated with overload protection
•10bar (150psi) maximum working pressure controlled by a fully automatic pressure switch.
•Specification also includes safety valve, pressure gauge, air outlet valve & drain tap.
•Application - these air compressors are perfect for professional automotive/industrial use
•Dimensions (LWH) 1390 x 420 x 920mm, Weight 97.5kg
Its a current model costing me over £500 but I need to clear my garage, so I'm looking to sell for the bargin price of £325

Sierra bits
Pair of Sierra rear calipers and sliders £23 ( I have four Pairs)
Adjustable steering column £25
Pair of Front brake calipers and hangers £30 for the pair

Email Pleggott@hotmail or phone 07598830409
Brough East Yorkshire

[Edited on 30/6/12 by fifty50]

[Edited on 30/6/12 by fifty50]

might be interested in the compressor but without a location its difficult to decide......

quote:

---

Originally posted by snakebelly
might be interested in the compressor but without a location its difficult to decide......

---

Yes I'm 14 miles west of Hull, I can be sent courier for around £60 to £65