Board logo

13" Revolution 4 Spoke Centre Rims (Various fitments now available)
cb_motorsport - 2/8/12 at 05:37 PM

Hi Folks,

I have various sets of 4 spoke Revolution centres for the split rims for sale. They are mostly are un-used and have been stored in my garage some do have a couple of scratches on from storage but are pretty much mint.

They are:

1 set of Ford fitment (4x108 / 4.25" ) 63.5mm centre bore, taper nut fitting in White

2 sets of Triumph (4x95.25 / 3.75" ) 67mm centre bore, sleeve nut fitting in Black

2 sets of VW, Vauxhall etc (4x100) 67mm centre bore, taper nut fitting in Black

1 set of MG / Jap etc (4x114.3 / 4.5" ) 67mm centre bore, taper nut fitting in Black

+ whatever else I can find over the weekend! They are all pretty much un-used and in excellent condition.

They are all 18 hole centres too.

Would like £240 ono for a set, I can post them for a small fee or you can collect from me in the Midlands.

If you have any questions then please give me a shout,

Many thanks

Chris

[Edited on 3/8/12 by cb_motorsport]

GavMax - 2/8/12 at 06:45 PM

Hi Chris

I would be interested in 18 hole Ford PCD centres.

Thanks
Gavin

cb_motorsport - 2/8/12 at 06:51 PM

quote:
Originally posted by GavMax
Hi Chris

I would be interested in 18 hole Ford PCD centres.

Thanks
Gavin


Hi Gavin,

Will have a good look through later tonight / tomorrow and let you know what I've got!

Many thanks

GavMax - 3/8/12 at 08:44 AM

Hi Chris

Still here on the Fords but a few more questions if I may -

Are the Ford fittings machined for sleeve nuts or countersunk?
Also, what dimensions are the centre cut outs (and are they all the same)?
Thanks
Gavin

RhinoRacing - 3/8/12 at 09:00 AM

Very interested in the ford 108 centres. Are they still for sale and how much are you after?

RhinoRacing - 3/8/12 at 09:03 AM

* sorry missed the price bit, ignore that bit.

cb_motorsport - 3/8/12 at 09:03 AM

quote:
Originally posted by RhinoRacing
Very interested in the ford 108 centres. Are they still for sale and how much are you after?


Yes they are for sale, I know GavMax is interested too. I want £240 for the 4, plus delivery (or collection from Sutton Coldfield / Jct 10 M42)

Thanks

Chris

GavMax - 3/8/12 at 09:47 AM

Chris

Unfortunately the centre bores are a little too large for me and too small for a shim to work.

I'll have to let them go I'm afraid

Thanks anyway
Gavin

cb_motorsport - 3/8/12 at 09:59 AM

quote:
Originally posted by GavMax
Chris

Unfortunately the centre bores are a little too large for me and too small for a shim to work.

I'll have to let them go I'm afraid

Thanks anyway
Gavin


Hi Gavin,

I have just re-measured the bore, it's actually 63.5mm (Standard Ford bore)

I will amend my original advert to show bore sizes shortly.

Many thanks

GavMax - 3/8/12 at 10:22 AM

Hi Chris

I have U2U'd you on the Ford Revs.

Thanks
Gavin

cb_motorsport - 3/8/12 at 10:35 AM

quote:
Originally posted by GavMax
Hi Chris

I have U2U'd you on the Ford Revs.

Thanks
Gavin


Replied

cb_motorsport - 3/8/12 at 02:47 PM

Ford Centre's have now been sold, may have another set available though.

[Edited on 3/8/12 by cb_motorsport]

cb_motorsport - 4/8/12 at 10:22 AM

The 4x100 centres are now on eBay, item 330773886140

Cheers

cb_motorsport - 9/8/12 at 12:02 PM

Bump! Still on eBay as an auction and as 'make best offer'.

Item numbers are: 330775241615 (Auction) and 330775737431 (Buy it now or Best offer)

Cheers

cb_motorsport - 15/8/12 at 08:08 AM

Bump.

Ford centres have now been sold, still got the following available:

2 sets of Triumph (4x95.25 / 3.75" ) 67mm centre bore, sleeve nut fitting in Black

2 sets of VW, Vauxhall etc (4x100) 67mm centre bore, modern taper nut fitting in Black

1 set of MG / Jap etc (4x114.3 / 4.5" ) 67mm centre bore, modern taper nut fitting in Black


Cheers

cb_motorsport - 5/9/12 at 05:49 PM

Just bringing this back to the top.

I have also got 4, 15" 4 Spoke centres too in a 4x114.3 PCD in black.

Still got:

2 sets of Triumph (4x95.25 / 3.75" ) 67mm centre bore, sleeve nut fitting in Black

1 set of VW, Vauxhall etc (4x100) 67mm centre bore, modern taper nut fitting in Black

1 set of MG / Jap etc (4x114.3 / 4.5" ) 67mm centre bore, modern taper nut fitting in Black

I'm open to sensible offers of any of the above!

I will be travelling down to Devon on Saturday so can meet anywhere along the M42 / M5 corridor if anybody wants to look / take any of them from me!

Cheers

cb_motorsport - 7/9/12 at 07:33 AM

last bump before the weekend

Open to offers to any of the above!

CNHSS1 - 7/9/12 at 12:30 PM

sent u2u

cb_motorsport - 11/9/12 at 01:38 PM

All the 4x100 centres have now gone.

Now that my & my fathers garage, sheds & lofts are empty, these are the remaining centres I have left:

2 sets of Triumph (4 x 95.25 / 3.75" ) 13" 4 Spoke centres, 67mm centre bore, sleeve nut fitting in Black

1 set of Honda, Nissan, Mitsubishi, Suzuki, Reliant Scimitar, MG etc (4x114.3 / 4.5" ) 13" 4 Spoke centres, 67mm centre bore, modern taper nut fitting in Black

1 set of VW, Vauxhall, Mazda, Toyota, Reliant, etc (4x100) 15" 4 Spoke centres, 67mm centre bore, taper nut fitting in Black

1 set of Honda, Nissan, Mitsubishi, Suzuki, Reliant Scimitar, MG, etc (4x114.3 / 4.5" ) 15" 4 Spoke centres, 67mm centre bore, modern taper nut fitting in Black

Open to offers on any of the above!

Cheers

cb_motorsport - 16/9/12 at 06:10 PM

Bump. 4x100 15" Centres now gone.

cb_motorsport - 20/9/12 at 06:56 PM

Back to the top!

2 sets of Triumph (4 x 95.25 / 3.75" ) 13" 4 Spoke centres

1 set of Honda, Nissan/Datsun, Mitsubishi, Suzuki, Reliant Scimitar, MG etc (4x114.3 / 4.5" ) 13" 4 Spoke centres

1 set of Honda, Nissan/Datsun, Mitsubishi, Suzuki, Reliant Scimitar, MG, etc (4x114.3 / 4.5" ) 15" 4 Spoke centres

13" Centres:


15" Centres:



Open to offers on any of the above!

Cheers

[Edited on 20/9/12 by cb_motorsport]

[Edited on 22/9/12 by cb_motorsport]

cb_motorsport - 23/9/12 at 07:00 PM

Anybody?

cb_motorsport - 28/9/12 at 08:09 PM

Bump!