
Now my IVA is done i have no use for these anymore.
FSE AIR007 1:1 regulator with 8mm push on conectors and glycerin filled gauge. This is a fantastic fpr and holds pressure perfectly steady which
allowed me to get my busa emmisions spot on for the iva. It has only been used for a few hours just to set the car up and the test. It cost me over
£100 so £75 posted.
Sparco suede steering wheel. It's 320mm od with a flat bottom. The suede had worn on the grip parts but they wear quite quickly anyway and it
still looks really good. Looking for £40 posted.
Sierra steering wheel. Big wheel that gives a big exemption zone for the iva. The horn push is missing. £15 posted.

I'll have the Sierra steering wheel please. U2U me with how you want to be paid and I'll let you have my postage address. Steve
Same for the sparco wheel please (payment details) :-)
Jim
I'm intersted in the for if the is price coming down
quote:
Originally posted by baz-R
I'm intersted in the for if the is price coming down
does the FPR gauge just fit on the side of the FPR?
also was your engine boosted?
You can fit the gauge either side of the fpr the set it up then when it is set replace it with the blanking plug. No mine wasn't boosted as the hayabusa has a static pressure at all revs/loads. There is a port on the top near to allow a vacuum pipe though. This is where i got it from
quote:
Originally posted by Davegtst
You can fit the gauge either side of the fpr the set it up then when it is set replace it with the blanking plug. No mine wasn't boosted as the hayabusa has a static pressure at all revs/loads. There is a port on the top near to allow a vacuum pipe though. This is where i got it from
Yeah ok £70 posted is fine with me. Paypal ok?
quote:
Originally posted by Davegtst
Yeah ok £70 posted is fine with me. Paypal ok?
quote:
Originally posted by scimjim
Same for the sparco wheel please (payment details) :-)
Jim
Cheers jim
Sparco wheel sold
Fpr sold.
Steve do you still want the sierra wheel?
U2U sent regarding the sierra steering wheel
All sold
Sparco wheel received today - many thanks :-)
No problem. Steve,i sent yours this morning so you should be getting it soon.