Parts for sale
Andy S - 15/12/12 at 04:57 PM
Pair of used Westfield yellow front cycle arches - good condition £40
Three off used Westfield blue front cycle arches with vent slots - will need a tidy up £25
Set of 4 early Westfield SE narrow body live axle 13x6 (108pcd) ET 20 ish Compomotive crossspokes wheels £40 provisionally sold
Pair red Caterham/Prelit clamshells - £20
Westy SE Narrowbody rad - £10 - provisionally sold
Pinto cambelt guard - £10
Pinto cam cover wide flange- £10
Pinto cam cover narrow flange - £5
Pinto / type 9 engine to box shim plate - £10
Pinto lifting eyes - £5
Pinto steel sump - £10 - if I can find it - could also shorten widen and baffle
Digidash lite 2 - with speed sensor only - no engine sensors - loom and wiring diagram - Alu finish - £ sold
Pinto 2.0L early type short engine 1.0mm overbore been in shed a good few years would need a hone to remove very light surface marks - £40 ( As
people pay £20 for sumps and dipstick tubes alone I may be better stripping it)
Princess 4 pot calipers - completely stripped - will need new pistons and a rebuild kit - £30
Escort 8" pair back plates rebuilt - new shoes etc. £20 - provisionally sold
Probably not the right forum - set of excellent condition Compomotive MO flat 5 spoke wheels pair 17x8 and pair 16x7 ET 11 Ford 108 PCD rear
Yoko's just legal front Nexens - near new - £300
Can post up some photo's for interested parties
[Edited on 15/12/12 by Andy S]
[Edited on 16/12/12 by Andy S]
Confused but excited. - 15/12/12 at 05:13 PM
U2U sent.
Rad and back plates now SOLD, to me!
[Edited on 15/12/12 by Confused but excited.]
jossey - 15/12/12 at 05:38 PM
Do you have to have a homer avatar to join this convo?
greed1 - 15/12/12 at 06:44 PM
Do you have a pic of the wheels
Thanks
Confused but excited. - 15/12/12 at 07:00 PM
quote:
Originally posted by jossey
Do you have to have a homer avatar to join this convo?
No but it helps for appearance and continuity.
jps - 15/12/12 at 07:19 PM
Interested in the pinto sump if you can chop it down etc for me so it suits a Haynes roadster build?
Andy S - 15/12/12 at 07:23 PM
quote:
Originally posted by jps
Interested in the pinto sump if you can chop it down etc for me so it suits a Haynes roadster build?
Will see if anyone wants it as is first before I put a price together for modding it.
Andrew
Andy S - 15/12/12 at 07:41 PM
Should have asked which wheels as now I have posted the old Westy wheels its bound to be the MO's LOL
jps - 15/12/12 at 07:56 PM
quote:
Originally posted by Andy S
quote:
Originally posted by jps
Interested in the pinto sump if you can chop it down etc for me so it suits a Haynes roadster build?
Will see if anyone wants it as is first before I put a price together for modding it.
Andrew
No prob, let me know if it doesn't go as it is.
gavin174 - 15/12/12 at 08:27 PM
Hi Andy
can you confirm if the digi dash has the loom with it...
what sort of condition is it in..
really interested
greed1 - 15/12/12 at 08:37 PM
It was the westy ones I am interested in but just looked on Google maps geography was never my strong point :-)
Good luck with the sale
Andy S - 15/12/12 at 08:50 PM
Digi is excellent and has the loom and the plugs -
gavin174 - 15/12/12 at 08:52 PM
i will take the digi dash please
let me know how you want payment
Andy S - 15/12/12 at 09:03 PM
No worries there are a few parts like these that are better off on the Retro forum- could have dropped them off as often in Warwick and Oxford at the
moment - so if anyone on the M54 M6 M42 M40 corridors for parts I may be able to deliver within reason but not possible before Xmas.
quote:
Originally posted by greed1
It was the westy ones I am interested in but just looked on Google maps geography was never my strong point :-)
Good luck with the sale
greed1 - 15/12/12 at 09:16 PM
Hi Andy if you are likely to on the m40 any time then I'm Interested again if you have room in your car
It would be good to have a second set for mine
Also interested in the princess calipers
Thanks graham
[Edited on 15/12/12 by greed1]