Board logo

Stoneleigh bargain bucket clearout
theduck - 29/4/13 at 08:32 PM

I've got a few odds and sods surplus to requirements that I can bring to stoneleigh on Sunday if people want them. Some free, some really cheap, some offer what you want to pay as I'm not sure on a value.

Pair of cycle wing brackets with upright supports cut off - SOLD

NEW IVA compliant rear view mirror from demon tweeks, the swivel is loose so mirror won't stay in position but this may be a simple fix £2

Pair of dummy struts - offers

Steel toggle switches x 2 - £1 each

Red illuminated toggle switch - £1

Pinto to type 2 gear box brace, may suit other boxes - offers

NEW in box breather filter blue cotton and silver top, cheapest on eBay is £3.50 - £2

Sierra brake bias valve - offer

Robin Hood engineering sticker - yellow with green archer - FREE

Short length of 32mm ID flexible hose - offer

Sierra dash brightness dial - FREE

Sierra wiper speed dial - FREE

Smiths temp gauge with corrosion to face behind glass, unknown condition otherwise - SOLD

Smiths mechanical oil pressure gauge with slight corrosion to face behind glass - SOLD

Pair 3mm wheel spaces - £1

Toggle switch kill cover red - £1

Heavy duty push button missing one terminal bolt - FREE

Gauge holder for 3 x 52mm dials in chrome - £1

Indicator/hazard warning diodes with wiring diagram 50p a set (4 available)

[Edited on 30/4/13 by theduck]


tilly819 - 29/4/13 at 09:09 PM

Hi,

could you post a picture of the cycle wing brackets?

cheers

Tilly


JC - 29/4/13 at 09:21 PM

Is the rear view mirror the type that suits cars with no windscreen? Thanks!


theduck - 29/4/13 at 09:37 PM

Yes mirror is bolt on type so suits no screen.

Brackets photo


tilly819 - 29/4/13 at 10:23 PM

Yeh i will take the wing brackets please, free stuff is the best stuff

could you U2U me your contact details, im at the show on Monday

cheers tilly


Just noticed you said you are there sunday, would you be able to leve then with someone for me? i will ask around


[Edited on 29/4/13 by tilly819]


JC - 30/4/13 at 04:28 AM

Thanks,any chance of some pics or which model it is please? TVM!


Myke 2463 - 30/4/13 at 06:02 AM

Dibs on these please

Smiths temp gauge with corrosion to face behind glass, unknown condition otherwise - FREE

Smiths mechanical oil pressure gauge with slight corrosion to face behind glass - FREE


theduck - 30/4/13 at 07:32 AM

Mirror is this one http://www.demon-tweeks.co.uk/motorsport/mirrors/demon-tweeks-interior-mirror-plastic-surround-2

Myke gauges are yours.


JC - 30/4/13 at 08:50 AM

Ok, thanks but not quite what I am looking for

Good luck with the rest!


theduck - 30/4/13 at 01:43 PM

Original post updated with what's taken.

Any more for any more?


theduck - 2/5/13 at 07:15 PM

More goodies


Pinto dipstick with oil level sender £2 SOLD

Mechanical oil pressure gauge with fittings - black face and chrome surround £5

Black cycle wings with u trim already attached as shown in photo below. Slightly too narrow for my 205 tyres. Currently have indicators fitted to rear lower corners which will be removed leaving just 2 small holes. £10 SOLD

[Edited on 2/5/13 by theduck]

[Edited on 3/5/13 by theduck]

[Edited on 4/5/13 by theduck]

[Edited on 4/5/13 by theduck]


theduck - 4/5/13 at 08:19 AM

Last few bits

30cm length of 8mm ID silicone hose
Swept wing/clam shell wing middle brackets
Pinto servo vacuum hose x 2
Pinto distributor cap and rotor arm used
Spare wheel carrier lower bracket

Will be bringing everything to Stoneleigh on Sunday with me and can be contacted through U2U which I will check through out Sunday.

[Edited on 4/5/13 by theduck]