Board logo

LHD Quick Rack & ProSpindles
43655 - 19/10/13 at 08:33 AM

Morning all,
Have a LHD Escort quick rack, believed to be 2.4 turns. Suitable for use with the rack behind the uprights in a RHD car.
Bought it as that's what i planned to use, changed my mind later so never been used.
Cost ~150 new, so say £90 posted?

Forged Wilwood Pro-Spindles, again never used, very slight corrosion on the spindles but only a wire wool job to remove.
Can supply the M18x1.5 top Transit links and standard Maxi ball joint bottoms with them.
Cost about £240 all in new, £180 posted?

Can get some photos if you like
Cheers
-Henk

snakebelly - 20/10/13 at 03:15 PM

The link you posted to the pro spindles on rally design lists them at £175 plus delivery so to get any interest i would suggest a bit of pencil sharpening may be needed, just thought you should know.

Ben_Copeland - 20/10/13 at 03:27 PM

quote:
Originally posted by snakebelly
The link you posted to the pro spindles on rally design lists them at £175 plus delivery so to get any interest i would suggest a bit of pencil sharpening may be needed, just thought you should know.


No they are £196 plus postage. Rally's website is all plus vat!!

Plus the drop links etc he's selling with them

[Edited on 20/10/13 by Ben_Copeland]

snakebelly - 20/10/13 at 04:19 PM

Ooops fair does then

43655 - 22/10/13 at 06:13 PM

indeed, irritatingly!
Plus i think i still have a set of bearings too to go with them

snakebelly - 22/10/13 at 08:39 PM

At least the post got a bump!
:-)

43655 - 31/10/13 at 06:50 PM

true, time for another

Spindles £160, Rack £80