Board logo

Hayabusa tuning parts and 6pt harness
Nick Skidmore - 8/12/13 at 09:58 PM

Available here before being fed to ebay.

Turbo plenum, integral bell mouth outlet stubs, four injector bosses in lid and tapped bosses for MAP sensor / pressure feeds. Polished and Anodised black, unused £100

8 Bosch injectors, 4 used and 4 new? in boxes. 0 280 156 012 which on a search seem to be specced at 412 cc/min @ 3 bar and 14mm O ring top and bottom. These will be Methanol compatible. £100

Heavy duty starter motor gear, not slipping clutch type but has wide gear in contact with the starter pinion. Micro polished / tumbled finish. New and unused £50.

Raceparts / Securon 6pt single seater harness, black, 8mm holes in mounting plates. Out of date for FIA in a few weeks but OK for speed stuff. Has generous length shoulder straps so would suit 'the fuller figure'. Used but unmarked. £30.

Also a Ralt RT3 roller, early spec if you're stuck with what to have for Xmas £12.5k

07903 474191, PM or nicktheskid@hotmail.co.uk

carpmart - 8/12/13 at 11:26 PM

quote:
Originally posted by Nick Skidmore

Raceparts / Securon 6pt single seater harness, black, 8mm holes in mounting plates. Out of date for FIA in a few weeks but OK for speed stuff. Has generous length shoulder straps so would suit 'the fuller figure'. Used but unmarked. £30.

07903 474191, PM or nicktheskid@hotmail.co.uk


Interested in the harness please. Aircraft coupler? 3 inch belts apart from groin area? 8mm holes suggests bolt in, is that correct?

Have you a pic you could share please?

Cheers

Nick Skidmore - 10/12/13 at 02:48 PM

harness, injectors and plenum gone.

[Edited on 10/12/13 by Nick Skidmore]