Hi all Iv got a zx9r b engine up for sale complete with loom carb that have been set ecu coils leads and caps . And clocks
It was running mint when taken out the kit car
Can take to stoneleigh
Oh and the lol.
Has had all the cut off switches bypassed so would be a easy in stall
£ 300 sound reasonable

Do you have any pics of your engine and whats the reason for the removal if you dont mkind me asking.
I'm thinking of changing the engine in my xflow powered striker. What car did it come out and does it come with any extras.
Cheers
Chris

Hi mate
Yea Iv got pics .. Can you pm me a number or email as I can't upload on hear for some reason
Reason for removal is Iv now taken up shooting and need a 4x4 to get me around the land I shoot so I never finished the
Haynes roadster so selling all item so can by 4x4
But your more than welcome to come and have a look at it any time ..
It's got loom ecu carbs clocks coils leads and plug caps
All there and it was running mint when removed from car
Cheers dan

u2u sent

Not received pal

Just done zx9 from x- flow

Just done zx9 from x- flow

Thanks for the info kj. How difficult did you find your conversion to bike power. Any tips or advice would be much appreciated.
Cheers
Chris

Hi Chris,

Not that bad realy, welded my own cradle and looked out for sprocket adaptor got my prop made lined it up.
I have had to reverse my air box and chopped it so its under the bonnet scoop. i would go for a rod gear change i did try cable but the rod is the easy.
Not chopped the sump but have a baffle on order which was £30 and some upgraded barnett clutch springs £22.00.
I need to finish the wiring for the ignition and then hopefully MOT time. I used the bikes original manifold just cut and joined it using some old r6 headers as they were slightly bigger and slipped over the zx9's i have wrapped it and may change to a stainles one later but this should get me on th road.

u2u sent hope you get it this time.

Yes mate sent email with photos
Cheers
Dab

Still for sale
Bump