2.0 litre injection cylinder head, (unleaded) professionally ported and skimmed, plus valves angled.
Complete with Crower 25306 camshaft, followers, and springs, and vernier pulley.
Was producing 142bhp with twin 45 webers and free flow exhaust manifold, on an otherwise standard bottom end.
Would make a good road car engine, as the power is produced from very low down, but has done well on the various trackdays I've done in the past couple of years.
It's cost me in the region of £500, would be looking for £200.

I'm located in the North East, any questions, just ask.

I will have it for £200, any chance you can arrange a courier? (Birmingham area)

Greg

[Edited on 25/2/08 by gregs]

I'll get it weighed up and let you know how much. Haven't a clue, to be honest.. it's not the lightest of articles!

gregs

you might want some of this stuff if you do get the head

Cheers

Mark

Mark - blatant advertising!! already got them i'm afraid, and a set of ITBs waiting.....

Andy - A number of the guys on here have recommended http://www.interparcel.com for carriage previoulsy.

Greg

quote:

---

Originally posted by gregs
Mark - blatant advertising!!
Greg

---

quote:

---

Originally posted by gregs
Mark - blatant advertising!! already got them i'm afraid, and a set of ITBs waiting.....

Andy - A number of the guys on here have recommended http://www.interparcel.com for carriage previoulsy.

Greg

---

Andy - you have U2U