Propshaft for BEC For Sale.

Bought for my B6 kit from Chester Sportscars and originally fitted to their demonstrator with ZX9R engine so not new but very low mileage (approx 200 miles).

The overall length is 1430mm closed, 1465mm open.

Front section is 540 - 575mm to the centre of the centre bearing (and contains a slider giving 35mm adjustment).

Rear section is 890mm, again to the centre of the centre bearing.

Front flange is as per standard adaptor supplied by many including http://www.sprocket-adaptors.co.uk/My_Homepage_Files/Page1.html (with dimensions on the site). Rear flange bolts direct to the Sierra diff.

With the slider being in the front section, the prop is designed for fixed differentials (IRS and dedion cars)

Looking for £75 + postage but would prefer collection (from the Chester area)

[Edited on 24/10/08 by Paul TigerB6]

Image deleted by owner

Image deleted by owner

Image deleted by owner

hi first dips on it please but can i just double check it will fit mine im goin to my car on sunday so can size it up then if thats ok is it to suit the sierra diff and is it fully balanced was it new when you brought it cheers adam

2nd dibs please

quote:

---

Originally posted by adam1985
hi first dips on it please but can i just double check it will fit mine im goin to my car on sunday so can size it up then if thats ok is it to suit the sierra diff and is it fully balanced was it new when you brought it cheers adam

---