flak monkey
|
| posted on 10/9/09 at 08:14 PM |
|
|
Some surplus clutch bits
Hydraulic slave cylinder. CSC002 as fitted to all mondeos other than the V6. Will also fit in duratec bellhousing, but will need a custom spacer
making as its slightly shorter than the proper one which should be used. Only suitable for clutches with curved fingers.
£25 posted
Mondeo 220mm clutch plate. With the smaller splined centre. 20mm x 17 splines. Not suitable for type 9.
£10
2 off clutch 220mm clutch covers. Both will fit zetec flywheels. Required clutch cover for zetec to type 9. Both brand new.
£15 each + post
Cheers,
David
Sera
http://www.motosera.com
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Bumble
|
| posted on 11/9/09 at 06:41 AM |
|
|
U2U sent.....
|
|
|
