madrallysport
|
| posted on 15/11/09 at 01:44 PM |
|
|
fs - sierra drive shafts, and rear hubs
Guys i'm having a clear out, pair of sierra push in shafts, 2 rear hubs, one missing the inner bit, every thing thats in the picture on the link
below, (sorry about the size of it) i'm open to sensible offers, via u2u, postage can be arranged.
Shafts link
[Edited on 15/11/09 by madrallysport]
[Edited on 15/11/09 by madrallysport]
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
matt_gsxr
|
| posted on 15/11/09 at 01:56 PM |
|
|
Are you sure these are for disk and not drum.
If the hub carrier has 6 holes then its disk (that is 4 to mount to the upright, and two to mount the caliper things off), else its drum. Normally
push-in == drum.
It would be a shame to disappoint someone.
Matt
|
|
|
madrallysport
|
| posted on 15/11/09 at 02:00 PM |
|
|
Cheers Matt
I'm just going with what i was told when i bought them, they came with disks and cal's in the same package from ebay, thanks for your
advice, i'll let the picture be the description, then people will know eactly what tey're buying.
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
JoelP
|
| posted on 15/11/09 at 02:39 PM |
|
|
hard to tell from the angle if it is the drum or disc one. If you rolled the top shaft 90 degrees then it would be obvious. 
|
|
|
madrallysport
|
| posted on 15/11/09 at 05:49 PM |
|
|
More pictures attached - Pic1
Pic2
Pic3
Hope this helps
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
coozer
|
| posted on 15/11/09 at 08:33 PM |
|
|
Drums, carrier only has the 4 bolts and tripod shafts didn't come with discs.
1972 V8 Jago
1980 Z750
|
|
|
CNHSS1
|
| posted on 23/11/09 at 04:32 PM |
|
|
im interested in a price for the pr hubs and flanges but dont want the driveshafts, have dozens already!
Cheers
CNH
|
|
|
